Some people believed that the wire being used in “Underground Fencing Systems” should be buried “underground”. We want you to know that this impression is not true. However, we still suggest burying the wire so you don’t practically have to bury it over and over again.

But for certain reasons, other people weren’t able to do these things. And if you are one of those individuals who are dealing with this dilemma that stops you from buying one fencing system, here’s an attractive and truly useful product especially created for your needs.

Fencing of your dogs using the Underground Fencing will never be a great big problem anymore. You will not be worried because you are renting your house, or don’t have any tools to use or no one will dig the ground for you. With the use of our wire securing staples, the hardest thing to do before will now be as easy as 1-2 steps. All you need to do is to lay down the wire and after a good rainy day, the wire will sink and you won’t be able to see it again. Isn’t it a wonderful and hassle-free solution to your installation problems?

Step 1:

»First outline your boundary wire in your desired shape and around the area you would like to contain. From your boundary wire connect the twisted wire to your transmitter and plug it in.
» Once you have come to a decision and you think the system you chose is correct for you, "Staple" the twisted wire to the ground by hammering in a wire "Staple" with a 5 - 6 feet distance from each other.
» Now stop and look at the wire and analyze it. Ask this question: Is it completely flush to the ground all the way to the start of the boundary? Take note that the wire MUST completely touch the ground. If not, go and "Staple" any raised areas before going on to the next step.

Step 2:

» Place a "Staple" where the twisted wire and the beginning of the boundary come together (if you have a splice in this area please dig a small hole about 2 inches deep and bury the splice. Then place a "Staple" in the front of and at the back the splice to relieve any pressure on the splice)
» After that, walk to the first corner of your boundary and "fasten" it to the ground. Do this step again for all corners of your boundary. (Not all yards are square if you do not have corners on your boundary, kindly select multiple anchor points for the wire)
» At this time, place staples as needed and ensure to staple any raised areas down until they are totally flush with the ground, for maximum safety for you and your guests.

RECOMMENDED RETAILERS

ONLINE STORE	COMMENTS	SHOP HERE
PetStreetMall.com	Great Customer Service

Back on Top^
View All Products »